Need additional wall height for oversized doors, RV storage, aircraft hangars, industrial equipment, or future mezzanines? We coordinate permit-ready plans with licensed structural engineers, engineered specifically for tall wall buildings that maximize usable space without compromising structural integrity.
A few extra feet of wall height unlocks a lot more usable volume — if the structure is engineered for it.
Room for RVs, aircraft, and equipment that standard-height walls can’t clear.
Stack, lift, and store more within the same footprint.
Engineer the frame to support a mezzanine level later, without starting over.
Forklifts, scissor lifts, and overhead cranes get the headroom they need.
If it needs headroom, we can engineer for it.
Taller walls change the math on wind, lateral force, and foundation design. Our engineering network accounts for all of it.
Calculated for your exact jurisdiction and wall height.
Roof and frame sized for local ground snow load requirements.
Shear and bracing details that keep taller walls rigid under load.
Footings and embedment sized for the added lateral load.
Engineered hardware and fastening for every joint and post.
Truss and rafter layout matched to your span and pitch.
Post and column sizing built for the extra height and load path.
Full engineering calcs behind every drawing we deliver.
Sealed by a PE licensed in your project’s jurisdiction.
Every wall height below is available as a starting point — we’ll engineer to whatever clearance your project needs.
Building dimensions, door sizes, equipment, and future expansion plans.
Review loads and local code requirements for your project.
Permit-ready engineering plans built around your exact clearance needs.
Receive stamped structural drawings and start building.
Every building is engineered around your unique height requirements — not a one-size-fits-all template.
Designed to meet your local building code, no matter where you’re building.
Receive plans quickly so your project keeps moving toward permit.
Placeholder photography — swap in real project photos anytime.
A tall wall building is any structure with wall heights beyond standard framing limits, typically anything over 12 feet. Most jurisdictions require an engineered structural plan once a wall crosses that threshold, common in RV storage, aircraft hangars, and equipment shops.
It's best to plan for your full required height up front. Increasing wall height after construction usually means re-engineering the foundation and framing, so we design for your maximum anticipated clearance from the start.
Yes. Taller walls carry greater wind and lateral loads, which typically require deeper embedment or larger footings. We size the foundation to match your specific wall height and site conditions.
Yes. Oversized roll-up and hangar doors require specific header and jamb detailing, which we include as part of your structural plan set.
Yes. Every plan includes wind load analysis specific to your jurisdiction, which becomes more critical as wall height and door openings increase.
Yes. Every plan set is reviewed and sealed by a licensed PE in the jurisdiction where your building will be permitted.
Yes. If you're planning a future mezzanine, tell us up front and we'll engineer the frame and foundation to support the added load later.
Turnaround depends on wall height, jurisdiction, and project complexity, but you'll receive a firm timeline with your quote.
From RV garages to industrial facilities, Struxsure delivers engineered structural plans designed specifically for tall wall buildings that meet code and maximize usable space.
